Service Hotline:13538593045
Announcement:
News Categories
Contact Us
13538593045

Dongguan Dingshun Foam Machinery Manufacturing Co., Ltd
Tel:0769-81007270
Tel:13538593045
Web:http://www.dsjxgx.com
Add:Room103, Building3, No.61 Yanjiangbei Second Road, GaoBu Town, Dongguan City,GuangDong,China

News
Current Location:Home > News > News
How to choose foam foam machine?
Add Time:2020-12-17
 

Believe that for many sponge processing industry friends, in the choice of foam foam machine will consider all aspects of the content, such as some people on the equipment performance requirements are higher, and some friends pay attention to the cost of foam machine.


Actually, choose machine of foam of a sponge to also have a few knowledge, introduce below.

1, from the processing needs to consider, to see whether the selected equipment can meet the corresponding processing requirements.

2. It is necessary to consider whether there is room for upgrading the foam foam machine in the future and whether the upgrading can be completed only by adding corresponding parts or replacing the old parts.

3. After the above two points are determined, the cost and price/performance ratio of the equipment should be considered in the end.

So as long as we from the above several reference factors to choose, in order to use their own really satisfied foam machine.


Foam is the ultimate product of the foam foaming machine system. Foam quality is the only standard to determine the foam quality of the foam foaming machine.

Should be given priority to with the following three aspects, namely foam density, foam uniformity, foam bleeding water. Sponge foam machine in these three aspects can meet the requirements, should be tested to confirm the approval.

1. The foam produced must be fine and dense, and the size of the foam has a great influence on the quality of the foam condensate, which is mainly affected by the following factors.

1.1 The smaller the bubble diameter, the higher the strength of foamed concrete; The larger the bubble size is, the lower the strength of foamed concrete will be. The bubble size is inversely proportional to the strength.

1.2 The larger the foam is, the more connecting holes are, the higher the water absorption rate is, the worse the pressure resistance is, and the more likely it is to be broken and connected when the slurry is squeezed before the slurry is set.

1.3 The bigger the bubble, the worse the casting stability.

1.4 The bigger the bubble is, the worse the insulation of foamed concrete will be. The experimental results show that the effect of bubble is better than that of bubble.

Sponge foam machine cleaning and maintenance

No matter what kind of mechanical equipment is necessary for daily maintenance, daily maintenance is able to determine whether the mechanical equipment can be normally used, is to extend the effective measures of the service life of equipment. Therefore, the maintenance of mechanical equipment must be taken seriously.

Sponge foaming machine is used for foam foaming equipment, in order to make the foam foaming machine long life, its maintenance is very important, the first maintenance work is to clean, clean the residual foam cotton, so as to avoid problems such as machine card, in addition is the dust also needs to be cleaned.